Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Peugeot Partner, you will need to hold down the button on the right side of the instrument panel while it is turned off. Then, insert the ignition key into the corresponding slot and turn it to turn on the instrument panel.

When the number zero appears next to the wrench icon, you can release the button and check that the maintenance light has turned off. You can also verify that the reset was successful by turning off and on the instrument panel again.


Posted on 12 February 2025 by ScegliAuto


Related tutorials

How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
How do you reset the Service light on the Peugeot Partner?
How do you reset the Service light on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) On the instrument panel of the Peugeot Partner, the Service light that is displayed can be reset by holding down the button located on the right side…
How to Reset the Service Light on a Peugeot Partner Tepee
How to Reset the Service Light on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) To reset the service light on a Peugeot Partner Tepee, get in the vehicle and turn off the instrument panel. Press and hold the trip reset button on …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos