Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the turbocharger of the Peugeot 307 1.6 HDI

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Turbocharger

Video tutorial

In this guide, we will see the main instructions that will allow us to disassemble and replace the turbocharger of the Peugeot 307 1.6 HDI. First of all, we open the hood of the car and start by removing the left hose of the turbine, loosening the clamp screw; then we remove the metal partition, as shown in the video.

At this point, we remove the exhaust gas recirculation manifold, unscrewing the fixing screws; we then proceed with the disassembly of the turbocharger, disconnecting the pipes and the electrical connector, following the video tutorial until the end!


Posted on 22 February 2025 by ScegliAuto


Related tutorials

Removing the Starter Motor from the Peugeot 307 1.6 HDI
Removing the Starter Motor from the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Today's main steps will show you how to remove and replace the starter motor on the Peugeot 307 1.6 HDI. First, lift the vehicle and start unscrewing…
Replacing the Starter Motor of the Peugeot 307 2.0 HDI
Replacing the Starter Motor of the Peugeot 307 2.0 HDI
Peugeot 307 (2001-2009 / MK 1) Today's guide will provide you with the main information needed to dismantle and replace the starter motor of the Peugeot 307 2.0 HDI. First, open th…
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
Peugeot 307 (2001-2009 / MK 1) Following the instructions provided in this guide, we will see how to disassemble and replace the engine coolant temperature sensor of the Peugeot 30…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos