Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the daily odometer of the Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Onboard computer

Today we will explain how to reset the daily odometer on Peugeot 3008, Peugeot 508, and Peugeot 5008 vehicles. To perform this simple operation, we need to turn on the vehicle and press the button located on the outer part of the right side to reset the odometer. By holding down the button, the number of kilometers will start flashing and after a few seconds will return to zero. Afterwards, you can turn off the vehicle. When you turn the vehicle back on, the odometer will show zero and you can proceed with the new kilometers, repeating the operation as many times as necessary.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light of the Peugeot 3008 2021
How to reset the service light of the Peugeot 3008 2021
Peugeot 3008 (2016-2023 / MK 2, P84) When the service light of your 2021 Peugeot 3008 remains on even after having it serviced at a specialized center in the area, don't worry because yo…
How to reset the tire pressure warning on the Peugeot 3008
How to reset the tire pressure warning on the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) These short and simple instructions will show us how to reset the tire pressure warning (TPMS) of the Peugeot 3008; before performing the reset, it i…
How to reset the tire pressure warning light on the Peugeot 3008
How to reset the tire pressure warning light on the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In a few simple steps, we will see the procedure for resetting the tire pressure warning on the Peugeot 3008; before resetting the TPMS sensors, it i…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos