Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light bulb

To replace the rear headlight bulb of a Peugeot 208, start by opening the trunk to access the inside of the headlight. The internal cover of the headlight is usually secured by a series of screws or clips that need to be removed in order to release the headlight. Once access to the headlight is freed, locate the electrical connections that power the bulbs and carefully disconnect them. At this point, the headlight can be slightly pulled out of its housing to access the bulbs. The bulbs are fixed in special bulb holders, which can be unscrewed or unclipped with a simple rotation. After removing the bulb holder, extract the burnt-out bulb and replace it with a new one of the same type. Make sure to handle the new bulb carefully, avoiding touching the glass with your fingers to not compromise the bulb's lifespan. Reassemble everything following the reverse procedure, reconnecting the headlight and securely fixing it to the body of the car.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Peugeot 208
How to replace the rear headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you want to replace the rear headlight bulb of your first series Peugeot 208 by yourself, you must follow all the steps described in this new guid…
How do you replace the rear headlight bulb of the Peugeot 208?
How do you replace the rear headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In order to replace the rear headlight bulb of the Peugeot 208, you need to open the rear hatch to locate the side panel of the trunk: this can be co…
How to replace the rear light bulb on the Peugeot 208?
How to replace the rear light bulb on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the rear light bulb on the Peugeot 208, open the bonnet to detach the plastic panel on the side of the boot: beneath this panel, there wil…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos