Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front bumper of the Peugeot 3008?

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Front bumper

See other generations:
Video tutorial

The replacement of the front bumper of a car is often unfortunately the result of an impact suffered by the same vehicle, so it becomes necessary to repair it or, in the worst case scenario, replace it. With this video tutorial we can get an idea of how to proceed with the work: Operationally there are not many complications, in fact there are locking pins to be removed at the top and bottom of the bumper, as well as on the sides.

As for the latter, you need to access them from the wheel arches, so they will need to be unhooked in order to insert your hand.

Lastly, you will need to disconnect the connectors of the rear electrical cables.


Posted on 12 May 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Peugeot 3008?
How to Remove the Front Bumper on a Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) You can remove the front bumper on a Peugeot 3008 by loosening the screws that secure the component to its housing at the front of the car: the screw…
How to Remove the Front Bumper on a Peugeot 3008 MK2
How to Remove the Front Bumper on a Peugeot 3008 MK2
Peugeot 3008 (2016-2023 / P84, MK 2) In today's video, you will see how to remove the front bumper on a second-generation Peugeot 3008 by following these simple steps. First, unscrew all…
How to Remove the Front Bumper on a Peugeot 3008
How to Remove the Front Bumper on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Hello everyone, today I will explain how to remove the front bumper from your Peugeot 3008. It is not a straightforward task, but with a bit of effor…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos