Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the adblue tank from the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

AdBlue is an anti-pollution additive used in the latest generation diesel engines, equipped with its own tank. It could at some point create problems and after a computerized diagnosis, as visible in this video, it could be decided to dismantle the aforementioned tank.

Its location is next to the left rear wheel, so the car must be lifted, then proceed to remove the locking pins, disconnect the connector, and finally the power cables of the input and output tubes of the product. An executive dynamic equal, in short, to the diesel tank.


Posted on 25 May 2025 by ScegliAuto


Related tutorials

How to top up AdBlue on a Peugeot 308
How to top up AdBlue on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this brief tutorial, we will see how to top up the AdBlue fluid on a Peugeot 308 with a BlueHDI diesel engine, second generation model produced fr…
How do you reset the AdBlue alarm on a Peugeot 308 2019?
Peugeot 308 (2013-2021 / T9, MK 2) If the AdBlue alarm of your Peugeot 308 has been activated, it means that the fluid level is low or there is a problem with the system. Before resett…
How to Reset the AdBlue Warning Light on the Peugeot 308?
How to Reset the AdBlue Warning Light on the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) If the AdBlue warning light appears on the dashboard of the Peugeot 308, it means that the level of additive liquid inside the appropriate tank is in…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos