Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Peugeot Partner 3 located?

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Fuse box

In the following guide, we will explain the steps you need to take in order to find the fuse box of your Peugeot Partner Mk3 on your own. First of all, you need to go inside the vehicle and locate the plastic panel located under the steering wheel, then remove it completely with your own hands. After removing the protective panel, you finally have access to the fuses of your Peugeot Partner, and the procedure is complete. In order to work on them safely, you need to disconnect the vehicle's battery.

Posted on 5 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Peugeot Partner?
Where are the fuses located in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) Each fuse box of the Peugeot Partner is responsible for containing the fuses that regulate the operation of the devices present on the vehicle: in th…
Where are the Fuse Boxes on a Peugeot Partner?
Where are the Fuse Boxes on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) Let’s see where the two fuse boxes are located on the Peugeot Partner; if you need to perform checks or possible replacements. To find the first one,…
Where is the heating resistor located in the Peugeot Partner van?
Where is the heating resistor located in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this video, you can see where the heating resistor is located in the Peugeot Partner van and how to proceed if you need to replace it, a very simp…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos