Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : Where are the fuses located in the Peugeot Partner?

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee MK 3 - Years 2018-2024
Part: Checks and maintenance
Operation: Where are the fuses located in the Peugeot Partner?

On the Peugeot Partner, the fuses are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it is possible to identify two boxes for holding the fuses. The first one is located in the lower part of the dashboard, below the steering column: this box contains the fuses that are responsible for the operation of the horn, the radio, the alarm, etc. The second box is located on the right side of the engine compartment: this one contains the fuses that are responsible for the operation of the turn signals, the windshield wipers, etc.


Posted on 19 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How to reset the engine error light on Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What does the yellow triangle warning light with an exclamation point on the Peugeot Partner indicate? Read Answer
    • Partner Tepee 2008-2018 - What does the orange triangle-shaped warning light with an exclamation mark mean on the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What does the engine fault light on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does the triangle light on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - Where is the engine starter fuse located in the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read Answer
    • Partner Tepee 2008-2018 - What does the TPMS warning light mean on a Peugeot Partner? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos