Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure warning light on the Peugeot 308?

Model: Peugeot 308 P5, MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

On the instrument panel of the Peugeot 308, the tire pressure warning light that appears can be reset by turning on the instrument panel, turning the appropriate key inside the ignition block: once the instrument panel is turned on, you can choose the settings option on the display in the center of the dashboard.

This will show a menu, where you can select the tire pressure option: then when the confirmation message appears, you will need to select "Reset" and verify that the warning light turns off. To prevent it from appearing again, the tires must be at the correct pressure level.


Posted on 25 July 2025 by ScegliAuto


Related tutorials

Peugeot 308 (2021-2026 / P5, MK 3) To completely clear the tyre pressure warning light shown on the instrument panel of the Peugeot 308, inflate the tyres to the correct pressure: the …
Peugeot 308 (2013-2021 / T9, MK 2) Resetting the tyre warning light on a Peugeot 308, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that yo…
Peugeot 308 (2013-2021 / T9, MK 2) In this tutorial, see how to reset the tyre warning light on a Peugeot 308, an extremely simple and quick operation. Before doing this, ensure that y…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos