Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Remove the headlight of a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight
Operation: Remove the headlight of a Peugeot 206

Do you want to remove the headlight of a Peugeot 206? Let's see in this video how to proceed: pull the plastic lever at the bottom left of the dashboard, then, lift the bonnet and put it in safety. Let's get a socket wrench and remove the upper part of the bumper trim, immediately after unscrew the screws around the stone guard and those placed in the lower part of the bumper. We peel off the plastic from the bumper and remove the headlight after unscrewing the pins. We disconnect the clamps and replace the worn bulbs. To carry out the assembly, we proceed in reverse. Finally we test the correct functioning of the lights.


Posted on 31 October 2023 by ScegliAuto



Removing the headlight bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to replace the headlight bulbs on a Peugeot 206? Let's see the disassembly of the bulbs and parts of the headlight. We open the front hood by pul
Remove headlight bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Change the damaged headlight bulbs of a Peugeot 206? Let's see how they replace each other. We raise the front hood by pulling the lever located at t
How to remove the headlight on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial we will see how to remove and eventually replace the headlight on the Peugeot 206, following the instructions below. First

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos