Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Peugeot 5008

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Battery

Today we will discover the instructions that will allow us to disassemble and replace the battery of the Peugeot 5008. First, we open the hood of the car and start removing the control unit located above the battery, disconnecting the various cables; then we disconnect both battery terminals (positive and negative), as shown in the video. At this point, we unscrew the screw of the battery bracket found at the bottom, removing it and replacing it with the new one (of the right type and with the same amperage); we then connect and reassemble the new battery!

Posted on 10 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 5008 (2009-2016 / MK 1) How to remove the battery from a Peugeot 5008? Let's look at the removal of the battery located in the engine bay. Lift the front bonnet after unlock…
Peugeot 5008 (2009-2016 / MK 1) To replace the battery in the Peugeot 5008, open the bonnet to locate the device inside the engine compartment: at the top right of the compartment, …
Peugeot 5008 (2017-2024 / MK 2) In order to replace the battery of the Peugeot 5008, you will need to open the hood so that it is possible to access the components inside the engine…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos