Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ambient temperature sensor of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019

In this guide we will see the instructions that will allow us to disassemble and replace the ambient temperature sensor of the Peugeot 208. First of all, let's move to the exterior of the car, next to the right rearview mirror, and remove the mirror cover; then we also remove the glass, disconnecting the small electrical connector. At this point, disconnect the electrical connector of the temperature sensor, remove it and replace it with the new one; then reassemble the temperature sensor and all the elements of the external rearview mirror!

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Light Bulb of the Peugeot 208
Replacing the Front Light Bulb of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Need to replace the front light bulb? Here’s how to replace the bulb from inside the light of a Peugeot 208. Open the bonnet, and remove the light co…
How to Reset the "Service" Light on a Peugeot 208
How to Reset the "Service" Light on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Before you can begin, sit in the driver's seat of your Peugeot 208. Start by pressing and holding the "SET" button located at the bottom right of the…
How to replace the air filter of the Peugeot 208
How to replace the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) The engine air filter in your first edition Peugeot 208 plays a very important role, that is to allow the engine to breathe and therefore to perform …

    Frequently Asked Questions

    • 208 2019-2026 - Where is the Pugeot 208 horn located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos