Do it yourself
Frequently asked questions about cars and motorcycles

How to check the level of AdBlue in the tank of the Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Checks and maintenance

Today we will explain how to check the level of AdBlue fluid in the tank of a Peugeot 3008. To check the level of the liquid, we need to get into the car and turn on the instrument panel. Press the button with the symbol of the wrench next to the odometer for a few seconds while keeping it pressed, we will be provided with information regarding the level of AdBlue, how many kilometers are left until the next service, the level of oil, and so on. After knowing the level, if necessary, we can top up or continue with the normal operation of the vehicle.

Posted on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2016-2023 / MK 2, P84) Let's see how to check the AdBlue level on your Peugeot 3008: it is not necessary to start the engine, just the ignition: locate the menu button and …
Peugeot 3008 (2009-2016 / T84, MK 1) The illumination of the AdBlue warning light on a Peugeot 3008 indicates a low level of fluid in the tank. To reset the warning light, you will need …
Peugeot 3008 (2009-2016 / T84, MK 1) To fill up the AdBlue tank of your car, start by opening the vehicle's hood. You will find the AdBlue tank cap separate from the fuel tank, usually o…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the message "Anti-pollution system fault" mean in the Peugeot 3008? Read answer
    • 3008 2009-2016 - Why does the display of the Peugeot 3008 not work? Read answer
    • 3008 2016-2023 - Why does the Peugeot 3008 screen not light up? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos