Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you fill the AdBlue tank in a Peugeot 3008 2.0 HDi?

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuel cap

See other generations:
Video tutorial

To fill up the AdBlue tank of your car, start by opening the vehicle's hood. You will find the AdBlue tank cap separate from the fuel tank, usually on the passenger side, near the engine compartment or under the hood itself.

Remove the cap, which is generally blue in color. Use a certified AdBlue container and pour the liquid slowly, being careful not to spill it. When the tank is full, close the cap well and check for leaks.

Your Peugeot 3008 will now be ready for the journey, complying with emissions regulations. If you don't feel comfortable doing it yourself, have a gas station attendant explain it to you because it is really simple.


Posted on 30 September 2025 by ScegliAuto


Related tutorials

How to Remove the AdBlue Tank from a Peugeot 3008?
How to Remove the AdBlue Tank from a Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) To remove the AdBlue tank from a Peugeot 3008, you need to access the underside of the vehicle, near the rear right wheel. Here, next to the fuel tan…
How to Replace the AdBlue Tank in the Peugeot 3008
How to Replace the AdBlue Tank in the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) To replace the AdBlue tank in the vehicle, you need to know that it is located above the diesel tank and therefore under the rear boot floor. To acce…
Resetting the AdBlue Light on the Peugeot 3008
Resetting the AdBlue Light on the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Today's instructions will show you how to reset the AdBlue light on the Peugeot 3008 by following these simple steps. First, get in the vehicle and t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos