Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the fluid levels of the Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will explain how to check the fluid levels before a trip in a Peugeot Boxer vehicle. To perform this operation, we need to open the front hood and remove the oil dipstick to check if the oil in the tank is between the minimum and maximum levels.

If the oil is towards the minimum, it is necessary to top it up. To check the levels of the fluids inside the water and brake fluid tanks, we need to look at the tanks from the outside due to their transparency. If the fluid is between the minimum and maximum levels, it is necessary to top it up.


Posted on 1 October 2025 by ScegliAuto


Related tutorials

Replacing the Remote Battery for the Peugeot Boxer
Replacing the Remote Battery for the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The remote that opens and closes the doors of the Peugeot Boxer is powered by a CR2032 battery, which depletes over time and use: when this happens, …
How do you deactivate the alarm of the Peugeot Boxer?
How do you deactivate the alarm of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To deactivate the alarm of the Peugeot Boxer, you need to connect a diagnostic tool to the OBD port of the vehicle: this can be found on the dashboar…
What Does the AdBlue Warning Light Mean in a Peugeot Boxer Van and How to Remove It?
What Does the AdBlue Warning Light Mean in a Peugeot Boxer Van and How to Remove It?
Peugeot Boxer (2006-2024 / MK 2) If the AdBlue warning light has illuminated on the dashboard of your Peugeot Boxer van, it means that the emissions fluid has reached a too low level…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos