Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear lights of the Peugeot 107

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

Video tutorial

The instructions provided in this guide will explain the process of disassembling and replacing the rear lights of the Peugeot 107. First, we open the rear hatch of the trunk and start unscrewing the fixing screws of the headlight that we find on the sides, using a socket wrench with extension; then we disconnect the electrical connector found on the back, as shown in the video.

At this point, we separate the bulb holder from the light fixture to replace any stop bulbs; then we reassemble the headlight and check the operation of all the lights of the rear light.


Posted on 19 November 2025 by ScegliAuto


Related tutorials

Peugeot 107 (2005-2014 / MK 1) If you notice that a rear lamp on your Peugeot 107 is blown, replace it as soon as possible for your safety. Open the rear hatch and use a suitable k…
Peugeot 107 (2005-2014 / MK 1) If you want to replace the engine air filter of your Peugeot 107 on your own, just pay attention to the various steps described in the following guid…
Peugeot 107 (2005-2014 / MK 1) The fuses on a Peugeot 107 are housed within two fuse boxes installed in the vehicle: in this car model, one can be found inside the cabin and one in…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos