Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear seat of the Peugeot 2008.

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Rear bench seat

Let's see in this video how to remove the rear seat of a Peugeot 2008: The seat is secured at the front with hooks that fit into holes where there are plastic locks that hold them in place, and these can be lifted by prying from below with a screwdriver. As we can see in the video, these locks grab the hook and secure it so that it doesn't move, and to put it back in place, it is sufficient to reposition it and press it slightly. At the back, the seat, which is in one piece, is only held in place by clips, so you just need to slide it out and remove it through the rear doors.

Posted on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 2008 (2013-2019 / MK 1) Today we will see the instructions that will allow us to disassemble and remove the rear seat of the Peugeot 2008. First, let's open the rear doors o…
Peugeot 2008 (2013-2019 / MK 1) To replace the front headlight bulb on the Peugeot 2008, open the bonnet to access the engine compartment. Next, remove the cap protecting the rear p…
Peugeot 2008 (2013-2019 / MK 1) Removing the external rear-view mirror from your Peugeot 2008 is easier than you think. The first step is to take off the mirror. To do this without …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos