Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of the Peugeot 3008.

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Rear bench seat

Today we will see the instructions that will allow us to disassemble and remove the rear seat of the Peugeot 2008. First, let's open the rear doors of the vehicle and start unfastening the clips of the seat that we find underneath, using a thin tool like a flathead screwdriver; then we pull firmly on the seat to remove it from the cabin, as shown in the video. At this point, we can carry out the repair or replacement of the rear seat, removing the backrests if necessary; all that’s left is to reassemble all the rear seats in order.

Posted on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

In the second series Peugeot 3008, how do you replace the rear windshield wiper?
In the second series Peugeot 3008, how do you replace the rear windshield wiper?
Peugeot 2008 (2019-2026 / MK 2) It should be noted that the video guide presented here was made using the Peugeot 2008 second series, but it is also suitable for the Peugeot 3008 se…
How to remove the rear seat of the Peugeot 2008.
How to remove the rear seat of the Peugeot 2008.
Peugeot 2008 (2013-2019 / MK 1) Let's see in this video how to remove the rear seat of a Peugeot 2008: The seat is secured at the front with hooks that fit into holes where there ar…
How to Remove the Rear Seat Cushion from a Peugeot e-2008
How to Remove the Rear Seat Cushion from a Peugeot e-2008
Peugeot 2008 (2019-2026 / MK 2) If something falls between the cushions of the rear seat of the Peugeot e-2008, this video explains how to remove it. Position yourself behind the re…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos