Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on the Peugeot Partner van?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, we can see how to reset the tire warning light in the Peugeot Partner van, an extremely simple and quick operation to be performed only once the correct pressure of each tire has been restored according to the instructions in the manual.

First, let's go inside the cabin, then insert the key and turn on the instrument panel.

Next, access the general menu on the display by pressing the appropriate button on the console, enter "VEHICLE CONFIG," "REINIT TYRES," and confirm the selection. To complete the procedure, it will be enough to restart the panel.


Posted on 16 January 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How do you reset the tire pressure warning light on the Peugeot Partner?
How do you reset the tire pressure warning light on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To reset the tire pressure warning light on the Peugeot Partner, you will need to insert the key and turn it to turn on the instrument panel, so that…
How to Reset the BSI Unit on a Peugeot Partner?
How to Reset the BSI Unit on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) You can reset the BSI unit on a Peugeot Partner by connecting a diagnostic tool to the vehicle's OBD port, located at the bottom of the steering colu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos