Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the AdBlue module on the Peugeot Partner 1.5 2020

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Checks and maintenance

In this video, we are shown the position of the AdBlue module on the 2020 Peugeot Partner, which is located at the bottom of the vehicle, in the rear area, in front of the rear axle, centered or slightly shifted towards the passenger side. It is a rectangular container, black or gray, with a blue filling cap (usually accessible from the cargo area through a hatch). The bottom of the tank houses the pump/filter/sensor module that injects AdBlue into the exhaust system. It is positioned there because it is a relatively sheltered area from direct impacts and distributes the liquid close to the rear axle, balancing the vehicle. The pump/filter module is very sensitive to shocks, stones, or blunt objects: a hit can break it, causing a leak. Cold can also increase the risk of crystallization in that position; the difficulty of access in case of maintenance should not be overlooked either.

Posted on 18 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Light in a Peugeot Partner?
How to Reset the AdBlue Light in a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) There are several methods to reset the AdBlue light on the Peugeot Partner. The first illustrated in the video consists simply of driving the vehicle…
Where is the airbag module of the Peugeot Partner Tepee located?
Where is the airbag module of the Peugeot Partner Tepee located?
Peugeot Partner Tepee (2008-2018 / B9) Disconnecting the airbag module of a vehicle means disabling the system altogether. This operation is usually carried out when we need to remove the …
How to Top Up AdBlue on the Peugeot Partner?
How to Top Up AdBlue on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To top up AdBlue on the Peugeot Partner, open the bonnet to access the components inside the engine bay: at the front, between the battery and the ra…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos