Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Peugeot Partner Van?

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Shift knob

See other generations:
Video tutorial

In this tutorial, you will see how to replace the gear knob on a Peugeot Partner van, an extremely simple and quick operation. First, grasp the base of the gaiter, then separate it from the console by pulling it upwards or, if necessary, using a plastic spatula to pry it off. Next, pull the knob towards you with force to detach it from the shaft, separate the gaiter from it by cutting the internal tie, and fix the replacement in the same way. At this point, simply reassemble everything by following the reverse procedure.


Posted on 10 February 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on the Peugeot Partner Tepee
Replacing the Gear Knob on the Peugeot Partner Tepee
Peugeot Partner Tepee (1996-2013 / MK 1) Below are the main steps to remove and replace the gear knob on the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, get inside the cab…
How to Replace the Fuel Filter in a Peugeot Partner Van?
How to Replace the Fuel Filter in a Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will learn how to replace the fuel filter in a Peugeot Partner van, a very simple and quick operation. First, ensure the engine…
What is the fuse diagram for the Peugeot Partner van?
What is the fuse diagram for the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this video, we can see where the fuse boxes of the Peugeot Partner van are located and what their corresponding diagrams are, which is useful in c…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos