Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : How to replace the diesel fuel filter in the Peugeot Partner van?

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Diesel filter
Operation: How to replace the diesel fuel filter in the Peugeot Partner van?

In this tutorial, we can see how to replace the diesel filter in the Peugeot Partner van, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then open the hood and remove the plastic cover, the filter box, and the corresponding manifold. Then, locate the filter housing, disconnect the sensor connector, and, using a flat-head screwdriver, disconnect both fuel pipes. At this point, we can remove the housing from its support, replace the filter, and reassemble everything following the reverse procedure.


Posted on 18 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How do you replace the diesel filter of the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - Where is the diesel filter located in the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - Where is the diesel filter of the Peugeot Partner from 2009? Read Answer
    • Partner Tepee 2008-2018 - Where is the Peugeot Partner diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos