Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Filter on a 2022 Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this video, we will see how to remove the cabin filter from a 2022 Peugeot Boxer: at the bottom of the dashboard, just below the control panel where the hazard button is located in the centre, pry with a not too large screwdriver to remove the plastic cover.

At the bottom, you will find a rectangular drawer placed horizontally, to remove it you will need to unscrew two screws.

Remove the front plastic part and then you can take out the filter. Clean the compartment well from dust and debris before fitting the new filter, ensuring that the arrows printed on the side point downwards.

Refit it in place, close the drawer, and replace the cover.


Posted on 30 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Peugeot Boxer
How to Replace the Cabin Air Filter on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To replace the air filter in the Peugeot Boxer vehicle, you will need a T20 key. The filter is located behind the central dashboard, so to replace it…
How to Replace the Air Filter on the Peugeot Boxer?
How to Replace the Air Filter on the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To replace the air filter on the Peugeot Boxer, open the bonnet to access the components inside the engine bay: the air filter box is located near th…
How to Replace the Clutch on the Peugeot Boxer?
How to Replace the Clutch on the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To replace the clutch on the Peugeot Boxer, loosen the screws securing the gearbox to its housing. It can be removed by unscrewing the bolts accessib…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos