Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Door trim panel

This guide shows how to remove the door panel of a Peugeot 308 (passenger side). First, use a trim tool to pry around the internal door handle. Next, remove the plastic trim cover of the door opening lever; take out the window switch buttons (unscrew the screws). Unscrew the perimeter screws securing the panel, detach the panel from the door, and disconnect the speaker power cables (courtesy light). Remove the cable for the door opening handle. For reassembly, proceed in reverse order.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
How to remove the rear door trim panel of the Peugeot 308.
How to remove the rear door trim panel of the Peugeot 308.
Peugeot 308 (2013-2021 / T9, MK 2) Let's see how to disassemble the rear door panel of a Peugeot 308: we start by removing the internal handle trim of the door, then we take off the co…
Removing the Door Panel on a Peugeot 308 SW
Removing the Door Panel on a Peugeot 308 SW
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove the rear door panel of a Peugeot 308 SW. First, open the door and use a T20 Torx spanner to remo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos