Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Grille from a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Trim cover

How to remove the grille from a Peugeot 206? Let's see how to detach it from above the front bumper. Undo the securing screws located above the grille (after raising the front bonnet), and using a suitable plastic lever, prise between the trim and the bumper until the plastics release. Once the plastics are released, remove the grille from the front bumper. Fit the new grille onto the bumper by pressing it down until it locks in place. Screw in the securing screws at the top of the grille. Check the correct fitting of the plastics.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) The main instructions in this guide will show you how to disassemble and replace the cooling radiator of the Peugeot 206 1.4 engine. First, open the …
How to Remove the Side Air Vent of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To remove the side air vent of the Peugeot 206, as well as many other models from the brand, use a flat-head screwdriver. This should not be used to …
How to Replace the Radiator Coolant in a Peugeot 206
How to Replace the Radiator Coolant in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's see how to replace the radiator coolant in a Peugeot 206. Disconnect the radiator hose at the bottom using a socket spanner, allowing the rusty…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos