Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the speakers of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Speaker

See other generations:
Video tutorial

Today we will explain how to replace the radio speaker on a Peugeot 308 car. Since the speakers are located inside the door panel, it is necessary to remove the panel in order to replace them. To remove the panel, we need to unscrew the screws on the sides and bottom.

Using a plastic tool or a flat-head screwdriver, remove the inner cover of the door handle and the outer cover of the door lock to unscrew the screws at the back; remove the window switch panel and disconnect the connector. After detaching the panel, unscrew the speaker mounting screws and press on the extraction tab to disconnect the connector.

Remove the damaged speaker and insert the new one. Tighten the three screws and connect the connector. Before mounting the speaker, make sure the wire connecting the speaker to the place inside the panel is connected to the speaker on the dashboard of the vehicle.

Once the wire is connected, mount the dashboard speaker by inserting it inside and reassemble the door panel by following the steps in reverse.


Posted on 13 February 2025 by ScegliAuto


Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) In this guide, you will find instructions for removing and replacing the front speakers on the Peugeot 308. First, open the front door and start remo…
Peugeot 308 (2013-2021 / T9, MK 2) Today we will explain how to remove the door panel to proceed with the replacement of the speakers. The vehicle on which we will perform this operati…
Peugeot 308 (2013-2021 / T9, MK 2) Hello! Today's guide aims to remove the rear light of our Peugeot 308. Start by opening the boot lid. Then, unscrew and remove the screws that secure…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos