Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Door trim panel

Today we will explain how to remove the door panel to proceed with the replacement of the speakers. The vehicle on which we will perform this operation is a Peugeot 308. To remove the panel, we must first remove the plastic cover on the fixed handle so that we can unscrew the screws underneath it. Using a flat-tip screwdriver, we remove the cover of the opening handle in order to unscrew the screw underneath. We unscrew the lower screws and remove the panel. Using a star screwdriver, we unscrew the speaker locking screws, disconnect the connector, and replace the amplifier. After replacing it, we mount the door panel.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
How do you remove the door panel of the Peugeot 308?
How do you remove the door panel of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In order to remove the door panel of the Peugeot 308, you need to pry with an object so that you can detach the trim around the corresponding handrai…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos