Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Pipes of the Peugeot 308 1.6 HDi?

Model: Peugeot 308 T7, MK 1 - Years 2007-2014

Today's main steps will allow us to remove and replace the diesel pipes connecting the high-pressure pump to the injection system of the Peugeot 308. First, open the engine bonnet and begin by removing the upper cover; then use a suitable plier to disconnect the fuel connectors and pipes attached to the pump and injection system, as shown in the video. Install the original pipes to ensure longevity, checking the wear condition of the fittings and connectors; then start the engine!

Posted on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Peugeot 308 1.6 HDI?
How to Replace the Timing Belt on a Peugeot 308 1.6 HDI?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the timing belt on a Peugeot 308 1.6 HDI, you need to remove the front right wheel and the corresponding wheel arch liner by loosening all…
Replacing the Fuel Filter on the Peugeot 308 - 3008 1.6 HDI
Replacing the Fuel Filter on the Peugeot 308 - 3008 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In today's video tutorial, you will see how to remove and replace the fuel filter on the Peugeot 308 1.6 HDI, as well as on the 3008, 207, and 208. F…
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - Where is the air conditioning fuse located in a Peugeot 308? Read answer
    • 308 2013-2021 - Where is the urea tank located on Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos