Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Peugeot 308 1.6 HDI?

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Peugeot 308 1.6 HDI, you need to remove the front right wheel and the corresponding wheel arch liner by loosening all the bolts shown in the tutorial. This will provide access to the lower pulleys; to access the upper ones, open the bonnet and work inside the engine bay. You will need to remove some obstructive parts and side covers: once the tensioner roller is moved, you can remove the belt from its housing and replace it. Finally, reassemble all the parts that were previously removed.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

When to change the timing belt on the Peugeot 308 1.6 HDI
When to change the timing belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) Below are the steps to understand how and when to remove the timing belt on the Peugeot 308 1.6 HDI; for this type of engine, the timing belt should …
How to Replace the Timing Belt on a Peugeot 308 1.6 HDI?
How to Replace the Timing Belt on a Peugeot 308 1.6 HDI?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the timing belt on the Peugeot 308 1.6 HDI, it is necessary to extract the engine from its housing for easier access. Next, loosen the scr…
How to Replace the Water Pump and Timing Belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) Today's guide will provide the necessary instructions on how to remove and replace the water pump and timing belt on the Peugeot 308 1.6 HDI. First, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos