Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Peugeot 308 1.6 HDI?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Timing belt

To replace the timing belt on the Peugeot 308 1.6 HDI, it is necessary to extract the engine from its housing for easier access. Next, loosen the screws that secure the cover over the pulleys and thus the belt. To extract it, insert screwdrivers into the toothed wheels to lock them, and loosen the tensioner bolt. Once this is loosened, you can remove the timing belt. Finally, insert the new belt, close it by reattaching the cover, and place the engine back into its housing.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle…
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) This guide shows you how to remove and replace the timing belt on the Peugeot 308 1.6 HDI. First, lift the vehicle and remove the front right wheel a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos