Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dipped beam bulbs in the Peugeot 107?

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Headlight bulb

In this tutorial, you will see how to replace the dipped beam bulbs in the Peugeot 107, a very simple and quick operation. First, ensure that the key is not inserted for safety, then open the bonnet, locate the connector at the back of the headlamp in question, and disconnect it. Next, remove the rubber cap, unclip the metal clip, and extract the old bulb from the housing. At this point, simply insert the replacement bulb without touching it directly with your bare hands and reassemble everything by following the reverse procedure.

Posted on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs on the Peugeot 107?
How to replace the front headlight bulbs on the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In this tutorial, you will see how to replace the front headlight bulbs on the Peugeot 107, an extremely simple and quick operation. First, ensure th…
Replacing Front Bulbs on Peugeot 107
Replacing Front Bulbs on Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Do you want to replace the front bulbs of the headlights? Here’s how to remove the bulbs from inside the headlight of the Peugeot 107. Lift the front…
How to replace the rear headlight bulbs in the Peugeot 107?
How to replace the rear headlight bulbs in the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In this tutorial we can see how to replace the rear headlight bulbs in the Peugeot 107, a very simple and quick operation. First of all, make sure th…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos