Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

Video tutorial

How do you replace the fan resistor on a Peugeot 206? Let's see how to perform the disassembly in this guide. Remove the glove compartment from inside the dashboard using a lever, and unscrew the perimeter screws with a screwdriver.

Once the glove compartment is removed, disconnect the large connector of the resistor and pull it out from the cabin. Insert a new fan resistor (connect the power connector).

Finally, reassemble the glove compartment inside the dashboard and tighten the screws. Check the correct installation of the previously mounted parts and test their proper functioning.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to remove the cabin ventilation fan from a Peugeot 206
How to remove the cabin ventilation fan from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you remove the cabin ventilation fan from a Peugeot 206? The cabin ventilation fan is located directly under the steering column; use a socket…
How do you replace the cabin fan of the Peugeot 206?
How do you replace the cabin fan of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The cabin fan installed on the Peugeot 206 can be replaced by loosening the screws that secure the trim panel located on the side of the driver's foo…
How to Remove the Radiator Fan from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The radiator fan in your car is simply secured with bolts around it. This means you just need to disconnect the fan connectors and unscrew those bolt…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos