Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Blower motor

The cabin fan installed on the Peugeot 206 can be replaced by loosening the screws that secure the trim panel located on the side of the driver's footwell: once this panel has been removed, the fan can be located. The fan must be freed from its seat by loosening the screws that secure it to its supports and disconnecting the power cables: then it will be possible to remove the fan and install the new one. The new fan must be connected and secured to ensure that everything is functioning properly.

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the cabin ventilation fan from a Peugeot 206
How to remove the cabin ventilation fan from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you remove the cabin ventilation fan from a Peugeot 206? The cabin ventilation fan is located directly under the steering column; use a socket…
How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos