Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan from Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Blower motor

In today's tutorial, you will learn how to remove the heating fan from the cabin of a Peugeot 206. First, access the inside of the car and remove the steering joint by taking off the metal plate and unscrewing the bolt; then disconnect the electrical connector from the fan and remove the upper plastic panel. At this point, disconnect all electrical connectors next to the fuse box to remove the switch, and take out the fan; simply replace it with the new one and reassemble everything!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin fan of the Peugeot 206?
How do you replace the cabin fan of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The cabin fan installed on the Peugeot 206 can be replaced by loosening the screws that secure the trim panel located on the side of the driver's foo…
How to remove the cabin ventilation fan from a Peugeot 206
How to remove the cabin ventilation fan from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you remove the cabin ventilation fan from a Peugeot 206? The cabin ventilation fan is located directly under the steering column; use a socket…
Heating fan of the Peugeot 206 that only works at the highest speed.
Heating fan of the Peugeot 206 that only works at the highest speed.
Peugeot 206 (1998-2012 / MK 1) A common issue that occurs on the Peugeot 206 is with the cabin fan, which only works at maximum speed, without working at intermediate speeds. The s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos