Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to remove the headlight of a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight
Operation: How to remove the headlight of a Peugeot 206

Do you want to remove the headlight of a Peugeot 206? Let's see how to proceed with the disassembly in the video. We open the bonnet by pulling the bonnet opening lever and put it in safety. We remove the central mask (as in video); we unscrew the locking pins on the headlight bar with a socket wrench. At this point we will find other pins in the lower part of the lighthouse; unscrew them from the metal plates. We detach the lamp holders from the headlight and extract the same from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins above the headlight, with the plastic band we cover the lower part. We test the correct functioning of the lights.


Posted on 20 November 2023 by ScegliAuto

This video is currently unavailable


Removing the headlight bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to replace the headlight bulbs on a Peugeot 206? Let's see the disassembly of the bulbs and parts of the headlight. We open the front hood by pul
Remove headlight bulbs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Change the damaged headlight bulbs of a Peugeot 206? Let's see how they replace each other. We raise the front hood by pulling the lever located at t
How to remove the headlight on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial we will see how to remove and eventually replace the headlight on the Peugeot 206, following the instructions below. First

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos