Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Peugeot 306

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Blower motor

In this guide, we will discover the instructions that will allow us to remove and replace the cabin fan resistor on a Peugeot 306. First, open the bonnet of the vehicle and start by removing the plastic cover located under the windscreen wipers; remove the cover located at the top right to access the cabin fan resistor, disconnecting the electrical connector to remove it, as shown in the video. Replace and install the new fan resistor, turning on the ignition and testing its operation at various speeds.

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna on a Peugeot 306?
How to Replace the Antenna on a Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) To replace the antenna on a Peugeot 306, go inside the cabin to loosen the screws securing the interior light located at the top centre of the cabin:…
How to Remove the Door Panel on a Peugeot 306?
How to Remove the Door Panel on a Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) Removing the door panel on a Peugeot 306 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, enter the cabi…
Where is the OBD port located on the Peugeot 306?
Where is the OBD port located on the Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) The Peugeot 306 has a diagnostic socket inside, also known as an OBD socket. The following video tutorial shows us the location and how to use this s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos