Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external rear-view mirror of a Peugeot 5008?

Model: Peugeot 5008 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Side mirror

See other generations:
Video tutorial

If you need to replace the external rear-view mirror of your Peugeot 5008, you can follow the steps shown in this video to understand how to do it. First, you should know that the bolt holding the rear-view mirror in place is located inside the door, so access is not immediate and you need to remove the door panel first.

To remove this element, you must first unscrew the securing screws, remove the handle and the switch panel (disconnecting the connector).

Once the door panel is removed, you can proceed to remove the external rear-view mirror.


Posted on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the Courtesy Light of the External Rear-View Mirror of the Peugeot 5008
How to Replace the Courtesy Light of the External Rear-View Mirror of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) These short and simple steps will show you how to remove and replace the courtesy bulb of the external rear-view mirror of the Peugeot 5008. First, m…
How to replace the external rearview mirror on the Peugeot 5008?
How to replace the external rearview mirror on the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In this tutorial, we can see how to replace the external rearview mirror on the Peugeot 5008, a very simple and quick operation. First, we open the d…
How to disable the automatic closing of the external rear-view mirror in the Peugeot 5008?
How to disable the automatic closing of the external rear-view mirror in the Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) Note that this video was filmed in a Peugeot 508, but the sequence shown is the same for the Peugeot 5008. The automatic closing function of the elec…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos