Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Peugeot Bipper

Model: Peugeot Bipper Tepee MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

Video tutorial

You can clear the Service light displayed on the instrument panel of the Peugeot Bipper by turning on the ignition with the key, without starting the engine: once the ignition is activated, press the accelerator pedal all the way down and, while holding it down, press the brake pedal seven times in a row. This will allow you to release both pedals and turn the key back to switch off the ignition; once it is turned on again, you can check that the light has disappeared.


Posted on 23 October 2026 by ScegliAuto


Related tutorials

Peugeot Bipper Tepee (2007-2016 / MK 1) To completely clear the Service light from the instrument cluster of the Peugeot Bipper, you need to remove the panel located at the bottom left of t…
Peugeot Bipper Tepee (2007-2016 / MK 1) In order to reset the Service light of the Peugeot Bipper, you need to loosen the screws that secure the panel located immediately below the steering…
Peugeot Bipper Tepee (2007-2016 / MK 1) Do you want to reset the service light on a Peugeot Bipper? Here's how to reset the maintenance light. Enter the vehicle, turn on the ignition (you w…

Other guides you may be interested in

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos