Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Spark Plugs on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Spark plugs

Let’s look at removing the spark plugs on a Peugeot 206. Pull the lever to open the engine compartment and lift the front bonnet; remove the soundproofing panel covering the engine head (unscrew the securing screws with a screwdriver), then remove the coils, unscrew the spark plugs using your socket wrench, and pull them out of the engine head. Take the new spark plugs and guide them into the engine head with the extension of the socket wrench, tightening them properly; secure the ignition coils onto the spark plug tops, and refit the previously removed panel with its screws. Close the engine bonnet when finished.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Peugeot 206
Replacing Spark Plugs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's replace the spark plugs in a Peugeot 206 petrol engine. Lift the front bonnet to access the spark plugs; start by removing the coil bar located…
How to Replace the Spark Plugs in a Peugeot 206?
How to Replace the Spark Plugs in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) As we can see in this tutorial, replacing the spark plugs in a Peugeot 206 is a very simple task within anyone's reach. First, ensure that the key is…
How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos