Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to remove the spark plugs of a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Spark plugs
Operation: How to remove the spark plugs of a Peugeot 206

How do you remove the spark plugs on a 206? We open the front hood and see the disassembly. Lift the front hood, put it in safety, remove the tightening screws from above the soundproofing panel that covers the engine head with a special socket wrench. We remove the coil bar, unscrew all the spark plugs with our socket wrench (we check the damaged ones), finally pull them out of the cylinder head. We fit the new spark plugs into the cylinder head, tighten them firmly, secure the power coils, mount the previously removed panel. We close the bonnet and start the car to check the operation.


Posted on 19 December 2023 by ScegliAuto

This video is currently unavailable


Peugeot 206 spark plug replacement
Peugeot 206 (1998-2012 / MK 1) Let's see the replacement of spark plugs in a Peugeot 206 petrol engine. We lift the front hood to access the candles; let's start with the disassemb
Removing the Peugeot 206 spark plugs
Peugeot 206 (1998-2012 / MK 1) We see the disassembly of the spark plugs on a Peugeot 206. We pull the lever of the engine compartment opening and lift the front hood; we remove th
How to remove the spark plugs of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Do you want to remove the spark plugs of a Peugeot 206 and don't know how to do it? Let's see in this detailed video how to proceed with the disassem

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - How much do spark plugs cost on the Peugeot 206 from 2000? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos