Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Spark plugs

Let's replace the spark plugs in a Peugeot 206 petrol engine. Lift the front bonnet to access the spark plugs; start by removing the coil bar located behind the cylinder head. Unscrew the securing bolts of the coil bar using a socket spanner: grip it with your hands and move it to extract it from above the cylinder head. Use a socket spanner to unscrew the spark plugs and pull them out of the engine block. Install the new spark plugs one at a time into the cylinder head, secure the coil bar and tighten it. Start the engine after installing all the spark plugs.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plugs from a Peugeot 206
How to Remove the Spark Plugs from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Want to remove the spark plugs from a Peugeot 206 but not sure how? Follow this detailed guide: Pull the engine compartment release lever located at …
Removing the Spark Plugs on a Peugeot 206
Removing the Spark Plugs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at removing the spark plugs on a Peugeot 206. Pull the lever to open the engine compartment and lift the front bonnet; remove the soundpro…
How to Remove the Spark Plugs from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the spark plugs from a 206? Open the front bonnet and proceed with the disassembly. Lift the bonnet and secure it, then remove the secu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos