Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Ignition Coils

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Ignition coil

If the engine struggles to start or runs unevenly after ignition, it is likely that a spark is not firing correctly in one of the cylinders due to a faulty spark plug or ignition coil. The ignition coil assembly and spark plug leads are located at the rear of the engine, just behind the rocker cover: disconnect all connectors by releasing the respective locks and unscrew the fastening bolts of the bar to remove it from its position, also removing the cable ties of the associated wiring to free it.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Exhaust Silencer
Instructions for Removing the Exhaust Silencer
Peugeot 206 (1998-2012 / MK 1) It is recommended to carry out this removal with the engine cold to avoid unpleasant burns. Once the vehicle is positioned on a lift, equip yourself …
Instructions for Installing Ignition Coils
Instructions for Installing Ignition Coils
Peugeot 206 (1998-2012 / MK 1) The ignition coils for the spark plugs are integrated into a single rectangular plastic block located just behind the engine and secured with two 10 …
Removing the Spark Plugs on a Peugeot 206
Removing the Spark Plugs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at removing the spark plugs on a Peugeot 206. Pull the lever to open the engine compartment and lift the front bonnet; remove the soundpro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos