Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ignition Coil Replacement

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Ignition coil

To access the ignition coil replacement, remove the vapour recovery pipe by disconnecting the connector with the yellow lever. Remove the connector from the ignition control unit and unscrew the two securing bolts with a ratchet spanner, taking them out manually to prevent them from falling. You can now remove the control unit by pulling it upwards. Refit the new control unit, ensuring the high-voltage connectors are correctly positioned. Reinsert the two securing bolts and reconnect the power connector. Reconnect the vapour recovery pipe and perform a functionality test.

Updated on 2 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Instructions for Removing Ignition Coils
Instructions for Removing Ignition Coils
Peugeot 206 (1998-2012 / MK 1) If the engine struggles to start or runs unevenly after ignition, it is likely that a spark is not firing correctly in one of the cylinders due to a …
Replacing Spark Plugs on Peugeot 206
Replacing Spark Plugs on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's replace the spark plugs in a Peugeot 206 petrol engine. Lift the front bonnet to access the spark plugs; start by removing the coil bar located…
Instructions for Installing Ignition Coils
Instructions for Installing Ignition Coils
Peugeot 206 (1998-2012 / MK 1) The ignition coils for the spark plugs are integrated into a single rectangular plastic block located just behind the engine and secured with two 10 …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos