Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Button on Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Push button

See other generations:
Video tutorial

This Peugeot model features an electric handbrake that engages automatically when the vehicle is turned off and disengages automatically during the start-up phase. There is also a button for manual operation located just behind the gear lever.

If this button gets damaged, it needs replacing. Start by removing the chrome trim around the centre console that surrounds the gear lever to access the base of the handbrake button.

This allows you to release the retaining tabs and extract it from its housing. Finally, disconnect the connector by rotating the bayonet locking mechanism.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Below are the instructions that will allow you to activate and deactivate the electric handbrake on a Peugeot 3008. When the vehicle is turned off, t…
How to Reset the Handbrake on a Peugeot 3008
How to Reset the Handbrake on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Next, see how to deactivate the automatic handbrake upon starting and turning off the vehicle on a Peugeot 3008. This procedure also applies to Peuge…
Replacing the Electric Handbrake Button on a Peugeot 3008
Replacing the Electric Handbrake Button on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Replace the electric parking brake button on a Peugeot 3008. Position the gear knob vertically, then use a plastic spatula to remove the trim above t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos