Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Handbrake on a Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Parking brake

See other generations:
Video tutorial

Next, see how to deactivate the automatic handbrake upon starting and turning off the vehicle on a Peugeot 3008. This procedure also applies to Peugeot 2008 vehicles. Turn on the vehicle's instrument panel and press the button with the brake symbol upwards and wait a few seconds.

The brake will be deactivated. To activate it, follow the same procedure in reverse: turn on the instrument panel and pull the button downwards to activate the brake.

In both cases, the instrument panel warning light will show whether the brake is active or deactivated.


Posted on 7 April 2026 by ScegliAuto


Related tutorials

How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Below are the instructions that will allow you to activate and deactivate the electric handbrake on a Peugeot 3008. When the vehicle is turned off, t…
Replacing the Electric Handbrake Button on a Peugeot 3008
Replacing the Electric Handbrake Button on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Replace the electric parking brake button on a Peugeot 3008. Position the gear knob vertically, then use a plastic spatula to remove the trim above t…
How to Release the Handbrake on Peugeot 3008
How to Release the Handbrake on Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Let’s see how to deactivate the automatic mode of the handbrake on the Peugeot 3008: start the engine and engage the handbrake by pulling the lever i…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos