Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
MK 1, T7
- Years 2007-2014 Are the rear brake pads of the 308 worn out? Let's see how to disassemble them. We lift the car on a column bridge up to the desired height, immediately after we go to remove the rim (with a telescopic wrench) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. We remove the pads from the wheel hub caliper with a screwdriver. We mount the new pads on the brake caliper. We mount the brake caliper with the holder, tighten all the pins and mount the wheel. Let's get ready to perform the same operations on the other calipers. We purge the caliper if lost and topped up oil. We test the functioning of the brakes.
Posted on 4 December 2023 by ScegliAuto
How to replace the brake pads on Peugeot 308
Peugeot 308 (2007-2014 / MK 1, T7) Are the rear pads of the Peugeot 308 worn out? Let's see the replacement. We lift the car on a column point to the desired height, remove the wheel.
Replacing the front brake pads of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) In this guide, let's see the instructions needed to disassemble and replace the front brake pads of the Peugeot 308. First, we raise the car and star
Replacement brake pads and front discs Peugeot 308
Peugeot 308 (2007-2014 / MK 1, T7) Do we want to replace the disc brake pads on a Peugeot 308? Let's see the disassembly of the pieces. We jack the car up to the desired height, remove Other guides that may interest you
|
Frequently Asked QuestionsHow do I replace the Land Rover Evoque auxiliary battery?In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |