Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Discs and Pads on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

In this video, we will see how to replace the front brake pads on a Peugeot 308. Open the bonnet and lift the front of the vehicle, then remove the wheels. Turn the disc outwards and insert a flat screwdriver into the caliper slot to push back the piston.

Next, loosen the caliper bolts, disconnect the brake hose, and secure the caliper to one of the coils of the shock absorber spring. Remove the pads, then take out the retaining screws for the disc and remove it. Clean the hub with a wire brush and lubricate it with copper grease.

Insert the new disc, but first clean it with brake cleaner. Reattach the caliper support and install the pads, applying copper grease to the outer side.

Insert the pads, reattach the caliper, tighten the bolts, and reconnect the brake hose. You can then refit the wheel and repeat on the other side.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Replacing Brake Discs on Peugeot 308
Replacing Brake Discs on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the front brake discs on your Peugeot 308 worn out and in need of replacement? Let's see how to remove them. Lift the car on a column lift to the…
Replacing Brake Pads and Front Discs on Peugeot 308
Replacing Brake Pads and Front Discs on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Do you want to replace the brake pads on a Peugeot 308? Let's go through the disassembly process. Lift the car with a jack to the desired height, rem…
How to Replace Brake Pads on Peugeot 308
How to Replace Brake Pads on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the rear brake pads on your Peugeot 308 worn out? Let's see how to replace them. Lift the car on a column lift to the desired height and remove t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos