Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

Here’s how to replace the rear brake pads on a Peugeot 308. Loosen the wheel nuts, lift the car, finish unscrewing the bolts, and then remove the wheel. Dismount the caliper by unscrewing the 13 mm bolts while holding the underlying 15 mm nuts in place.

Once the caliper is free, support it in position with elastic cables, remove the old pads and the sliding shims. Using the appropriate tool, retract the brake caliper piston, and clean the surfaces with compressed air. Position the new sliding shims and install the new pads.

Refit the brake caliper, ensuring the two clips are correctly positioned. Tighten the two screws using the new ones provided in the kit, reattach the wheel, and lower the car. Repeat the process on the other wheel.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Replace Brake Pads on Peugeot 308
How to Replace Brake Pads on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the rear brake pads on your Peugeot 308 worn out? Let's see how to replace them. Lift the car on a column lift to the desired height and remove t…
Replacing the Front Brake Pads on a Peugeot 308
Replacing the Front Brake Pads on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides instructions for removing and replacing the front brake pads on a Peugeot 308. First, lift the vehicle and remove the front wheel…
Replacing Brake Pads and Front Discs on Peugeot 308
Replacing Brake Pads and Front Discs on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Do you want to replace the brake pads on a Peugeot 308? Let's go through the disassembly process. Lift the car with a jack to the desired height, rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos