Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : Replacing the front brake pads of the Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 2, T9 - Years 2013-2021
Part: Brake pads
Operation: Replacing the front brake pads of the Peugeot 308

In this guide, let's see the instructions needed to disassemble and replace the front brake pads of the Peugeot 308. First, we raise the car and start disassembling the front wheel; then unscrew the fixing screws of the brake caliper, putting pressure on the piston that we find inside to make it retract, as shown in the video. At this point we remove the old brake pads, cleaning the caliper from the residual dirt; we install the new brake pads, with the original or excellent quality ones, assembling our braking system again!


Posted on 16 May 2023 by ScegliAuto



How to replace the brake pads on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the rear pads of the Peugeot 308 worn out? Let's see the replacement. We lift the car on a column point to the desired height, remove the wheel.
How to replace front brake pads on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Let's see how to replace the front brake pads on Peugeot 308. We raise the car on a column spike to the desired height, immediately after we go to re
Replacement brake pads and front discs Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Do we want to replace the disc brake pads on a Peugeot 308? Let's see the disassembly of the pieces. We jack the car up to the desired height, remove

    Frequently Asked Questions

    • 308 2013-2021 - How much does it cost to replace the brake pads on Peugeot 308? Read Answer
    • 308 2013-2021 - How long do the brake pads last on Peugeot 308? Read Answer
    • 308 2007-2014 - How much do the Peugeot 308 brake pads cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos