Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Discs on Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Brake rotors

Are the front brake discs on your Peugeot 308 worn out and in need of replacement? Let's see how to remove them. Lift the car on a column lift to the desired height and remove the wheel. Disconnect the caliper from the rear brake. Unscrew the securing bolts of the brake disc. Use a screwdriver to remove the pads if they need replacing. Fit the new disc and the new pads onto the caliper, then reattach the brake caliper. Tighten all the bolts and refit the wheel. Test the brake pressure on the caliper after installation. Bleed the brake if necessary and top up with new brake fluid.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads and Front Discs on Peugeot 308
Replacing Brake Pads and Front Discs on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Do you want to replace the brake pads on a Peugeot 308? Let's go through the disassembly process. Lift the car with a jack to the desired height, rem…
Replacing the Front Brake Pads on a Peugeot 308
Replacing the Front Brake Pads on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides instructions for removing and replacing the front brake pads on a Peugeot 308. First, lift the vehicle and remove the front wheel…
Replacing Front Headlamp Bulb on Peugeot 308
Replacing Front Headlamp Bulb on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Have damaged bulbs on your Peugeot 308? Here's how to remove them from inside the headlamp. Open the front bonnet by pulling the lever located at the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos